ZEN S51204 thrust ball bearings

B:104.00 mm; Oil Speed Rating n2:3000 rpm; D:210.0000 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2300 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:375000 N; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:332000 N;

Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; d:65.000 mm; D:140.0000 mm; Accessories:Two Seals & Snap-Rin; B:58.70 mm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:163000 N; Grease Speed Rating n1:3200 rpm;

Grease:1550 kN; with cylindrical bore:940 min-1; Oil:141.110 kN; Static (Cor):16.7 mm; d:190 mm; Dynamic (Cr):9 mm; B:92 mm; rs (min):4 mm; D:340 mm; Pu:1040 kN;

H1:114.3 mm; H2:44.45 mm; Mass pillow block:39.9 kg; Cap bolt, SAE grade:8; Bearing:22220 EK; P90°:105 kN; A2:155.575 mm; Stabilizing ring:SR-20-17; Ca:55.804 mm; PosiTrac Plus contact element:2 x B10724-102;

D1 ≈:249.6 mm; Basic static load rating C0:380 kN; K:5 mm; Calculation factor Y0:0.52; Calculation factor X:0.57; Da max.:248 mm; ra max.:2.1 mm; D:280 mm; Calculation factor Y1:0.55; a:181 mm;

Specific dynamic load factor K:10 N/mm²; B:70 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; d:80 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.58 kg; Tolerance housing:H7; Tolerance shaft:h8

S:4.763 mm; P120°:50.7 kN; P180°:55.6 kN; Cap bolt recommended tightening torque:203.4 N·m; L:387.35 mm; PG:1/4 NPT; Bearing:22220 EK; Labyrinth ring:2 x LOR 100; P150°:46.3 kN; R1:58.737 mm;

d:950 mm; Basic dynamic load rating C:540 kN; r1,2 min.:2 mm; ra max.:2 mm; D:1080 mm; Basic static load rating C0:5100 kN; Mass bearing (including seat washer where applicable):52 kg; Minimum load factor A:140; d1 ≈:1027 mm; da min.:998 mm;

Lw:19.8 mm; r2 max.:0.8 mm; Mass needle roller:1.1 g; r1 max.:0.6 mm; r1,2 min.:0.2 mm; Dw:3 mm;

Lock washer:W 20; d1:88.9 mm; d3 max.:131.902 mm; B4:21.438 mm; G:99.517 mm; Mass adapter sleeve assembly:2.85 kg; d:100 mm; B:19.304 mm; B1:100.609 mm; Lock nut:AN 20;

Adapter sleeve assembly:SNW 17x2.15/16; A2:127 mm; P180°:32 kN; P60°:78.7 kN; Labyrinth ring:2 x LOR 53; H:187.325 mm; Ca:45.796 mm; Stabilizing ring:SR-17-14; Initial grease fill:110.56 g; Max. speed for PosiTrac Plus seal:1950 r/min;

Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:78100 N; Oil Speed Rating n2:5000 rpm; d:60.000 mm; B:36.50 mm; Grease Speed Rating n1:3800 rpm; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:88000 N; D:110.0000 mm; Accessories:One Shield & Snap-Ri;

B:25 mm; r, r1,2 min.:1 mm; Mass inner ring:0.14 kg; d:65 mm; F:72 mm;

D:52.0000 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:23800 N; Fillet Radius ra:1.00 mm; Accessories:One Seal & Snap-Ring; Sealed Speed Rating n3:8500 rpm; d:20.000 mm; B:22.20 mm; Basic Static Radial Load Rating Co:20000 N;

Oil Speed Rating n2:9000 rpm; Basic Dynamic Radial Load Rating C:49400 N; Grease Speed Rating n1:6700 rpm; Fillet Radius ra:1.50 mm; B:23.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:33500 N; d:40.000 mm; D:90.0000 mm;